發布時間：2021-10-08 00:38:22
Prior PL-200 Slide Loader 高通量自動玻片裝載系統Prior PL-200 Slide Loader 高通量自動玻片裝載系統是一套先進的顯微鏡玻片自動裝載系統，最多可放置200片玻片，結合Prior精準的自動載物平臺，可完成顯微樣本自動取相拍照，達到無人看顧，自動換片、自動定位、自動拍照的目標。PL-200可搭配四個玻片架，每個玻片架的容量可放置50個玻片，系統會自動偵測感
Prior PL-200 Slide Loader 高通量自動玻片裝載系統
Prior PL-200 Slide Loader 高通量自動玻片裝載系統是一套先進的顯微鏡玻片自動裝載系統，最多可放置200片玻片，結合Prior精準的自動載物平臺，可完成顯微樣本自動取相拍照，達到無人看顧，自動換片、自動定位、自動拍照的目標。PL-200可搭配四個玻片架，每個玻片架的容量可放置50個玻片，系統會自動偵測感知玻片架，并且自動判定玻片架是否被移除或安裝。當系統偵測到新的玻片架時，先進的玻片偵測系統會自動偵測玻片的數量及玻片的個別位置。為了確保數據的正確性可以完整的關聯到每一個玻片，并且能夠符合GoodLaboratory Practice (GLP)的要求，可再選擇搭配1D或2D的BarcodeReader使用。另外，還附帶一套完整的軟件開發工具，可以很容易的與第三方軟件進行整合。
核心系統
可選配件
|  |
PriorScientific Slide LoaderPL-200 (自動化玻片載臺)榮獲2009年LaboratoryEquipment Magazine讀者最佳票選獎，對于Prior所有的成員，這是最大的激勵與敬意，特別是在研發與生產制造部門的工作人員。
Prior PL-200(自動化玻片載臺)對于實驗室的顯微研究領域提供了一個重大的進步，它整合了Prior的H101A高精度自動載物臺,能夠做到高精度的自動化玻片檢測應用.
200的玻片的容量，代表的就是可以在無人操作的情況下，可以自動化完成好幾個小時的玻片檢測工作。
關鍵性能;
最大可裝載200塊玻片,15-25秒的加載時間
抽取式片夾，安全可靠
可選購條形碼閱讀器
方便易用的軟件整合與兼容顯微鏡平臺設計
The PL-100/PL-200 Slide Loaders are advanced systems for automatic slide handling in a variety of microscope applications. The PL-200 model is designed for 1×3 slides and accommodates up to 200 slides that are housed in four removable slide racks, each of which holds up to fifty slides. The PL-100 model is designed for 2×3 slides and is capable of handling up to 100 slideswhich are housed in two racks of fifty. Sensors on the loader monitor the presence of the slide racks so the system can intelligently respond when racks are changed in the middle of a run for example. Installation of a rack on the loader initiates a unique slide detection system which automatically identifies the location of the slides. Prior has optimized both to provide the highest productivity with a complete system capable of performing load/unload cycles in as little as 24s. The units can be used with existing microscopes simply by adding the appropriate Prior scanning stage.
Prepared specimen slides are precious, often unique, and need to be handled with care. In addition to the slide retaining design of the slide racks, a range of further safety features have been included in the units to minimize the risk of damage to slides. The slide gripper includes a sensor to detect the presence of a slide. If the state of this sensor changes due to an absent slide for example, the system will stop and report an error message. A similar approach is taken on the scanning stage where a sensor identifies if a slide is present on the stage. Slide scanning will not take place for example, if a slide is not successfully placed onto the stage. A third sensor is used to monitor the position of the slide relative to the stage. If the user inadvertently moves the scanning stage in the Z axis, collisions are avoided by this sensor.
英國Prior公司中國指定代理商：廣州市元奧儀器有限公司
